Built to Control Every Detail.
From stainless coil to finished architectural metal, MetalMagus keeps critical processes under one roof — giving you better control over material, surface, fabrication, quality, and delivery.
One Factory. More Control.
Your project does not stop at material selection. Surface finish, dimensional accuracy, fabrication, pattern, color, and installation all affect the final result. MetalMagus integrates key manufacturing capabilities into one connected workflow, reducing unnecessary handoffs and keeping every critical detail under control. Use the index above to jump to any capability.
Material Is Where Control Begins.
Every finished surface starts with the right material. MetalMagus works with stainless steel selected according to application, specification, surface requirements, and fabrication needs.
Stainless Steel Coil Processing
From incoming coil to production-ready material, we manage the early-stage processing required for downstream manufacturing.
304 & 316 Stainless Steel
Different environments require different material choices. We help match stainless steel grades to the project's application and performance requirements.
Slitting & Leveling
Controlled material preparation provides a stable starting point for surface finishing, fabrication, and customized production.
Material Traceability
Material information can be tracked through the production process, providing greater visibility from raw material to finished product.
Good Design. Better Manufacturing.
A drawing may define what a product should look like. Manufacturing determines whether that design can be produced consistently, efficiently, and economically. Our engineering team reviews drawings and project requirements before production.
Drawing Review
We review dimensions, structures, tolerances, finishing requirements, and fabrication details before production.
DFM & Process Suggestions
When a design creates unnecessary manufacturing complexity, we suggest practical process alternatives without losing the intended appearance.
Detail Optimization
Small changes in bends, joints, holes, edges, or fabrication sequences can make a significant difference to production efficiency and final quality.
Sample Verification
For customized projects, samples can be developed and reviewed before mass production to confirm appearance, finish, and key specifications.
One Connected Finishing Workflow.
Surface, pattern, and fabrication are not separate steps here — they run as one connected workflow. Switch between the three to see what we control in-house.
Slitting
Coil is slit to the exact strip widths a project calls for, before levelling and fabrication.
Cut-to-Length & Levelling
Coil is levelled and cut to sheet length, setting flatness before any surface work begins.
Coil Grinding — Hairline
Hairline grain applied to coil, so the directional line stays unbroken across long runs of material.
Sheet Grinding — Hairline
Sheet-to-sheet grinding for panels that need a matched grain and consistent flatness after levelling.
Mirror Polishing — 8K
A multi-head polishing line that takes the surface to a near-mirror 8K reflection.
Sandblasted
A controlled matte texture reduces reflection and creates a softer, more uniform surface.
PVD Coloring
PVD coating adds controlled color and visual depth while maintaining the character of stainless steel.
Anti-Fingerprint
A protective surface treatment designed to help maintain a cleaner appearance in high-contact applications. Satin also available on request.
Etching
Create precise patterns, graphics, textures, and customized visual details on metal surfaces.
Embossing
Add three-dimensional texture and depth through controlled forming processes.
Customized Tooling
Develop dedicated tooling for special patterns, textures, and non-standard components.
Complex Shapes
Support customized components where standard flat sheets are not enough to achieve the required design.
Cutting
Precision cutting according to drawings and production requirements.
Bending
Controlled bending for panels, profiles, covers, and customized components.
Punching & Stamping
Create functional openings, patterns, and formed details according to project specifications.
Welding
Join customized metal components while maintaining structural integrity and visual requirements.
Honeycomb Fabrication
Lightweight metal panel construction for applications requiring a combination of rigidity and reduced weight.
Quality Is Measured, Not Claimed.
A good-looking sample is not enough. The real test is whether every production batch can stay within the agreed requirements. MetalMagus applies measurement and inspection throughout the manufacturing process to verify critical quality parameters.
Production Inspection
Quality checks are integrated into the manufacturing workflow rather than left only to final inspection.
Dimensional Accuracy
Key dimensions are checked against approved drawings and specifications.
Color Difference
For colored and finished surfaces, color consistency is monitored to reduce visible variation between batches.
Surface Quality
Surface appearance, finish consistency, scratches, defects, and other visible details are inspected before shipment.
Traceable Production
Production information can be tracked across key stages, providing greater visibility for customized orders and project requirements.
One Connected Path. No Lost Handoffs.
The fewer times your project changes hands, the easier it is to control the result. Here is how a request moves through our integrated workflow.
- 1
Share Requirements
Drawings, samples, specs, quantities, finishes.
- 2
Engineering Review
Design and manufacturing feasibility reviewed.
- 3
Material Prep
Coil selection, slitting, leveling.
- 4
Surface Finishing
Hairline / Mirror / Sandblasted / PVD / AF.
- 5
Pattern & Texture
Etching / Embossing / Perforation / Custom.
- 6
Fabrication
Cutting / Bending / Punching / Welding / Honeycomb.
- 7
Quality Control
Dimension / Color / Surface / Specification.
- 8
Delivery
Project-ready products prepared for shipment.
From our line to your site.
Finished architectural metal components are packed and prepared for worldwide delivery to 60+ countries.
Why Integrated Manufacturing Matters.
It is not only about equipment. It is about giving your project a more controllable path from material to finished metal.
Fewer Handoffs
Less coordination between different suppliers means fewer opportunities for information to get lost or specifications to change.
Better Surface Consistency
When material preparation, finishing, and fabrication are connected, surface requirements can be managed throughout the production process.
Faster Problem Solving
Engineering and production teams work within the same manufacturing system, making it easier to identify and resolve production issues.
More Predictable Delivery
Integrated processes give us greater visibility over production schedules and help us manage customized orders more effectively.
One Accountable Partner
Instead of coordinating material suppliers, finishing factories, fabricators, and quality teams separately, you have one manufacturing partner responsible for the complete process.
Built Around Your Project, Not Just Our Process.
Different customers enter the manufacturing process from different starting points. Our capabilities are designed to adapt to the way your project is developed.
Engineering Companies
From drawing review and material selection to fabrication and delivery, we support the technical requirements behind the project.
Designers
Explore different surfaces, patterns, textures, and metal expressions while keeping manufacturing feasibility in view.
Trade Companies
Consolidate material, finishing, fabrication, and quality coordination through one manufacturing partner.
Owners & Developers
Gain greater visibility and control over customized architectural metal production.
Capability You Can See. Control You Can Measure.
Certified: Zhejiang High-Tech Enterprise · Zhejiang Innovative SME · ISO 9001 quality management system.
Frequently Asked Questions
MetalMagus integrates material processing, design optimization, tooling, surface finishing, pattern processing, sheet metal fabrication, quality inspection, and installation support.
Yes. We can review customer drawings and project specifications, identify potential manufacturing issues, and provide process suggestions where needed.
Yes. Customized surface finishes and decorative patterns can be developed according to project requirements, with sampling available for confirmation.
Yes. Our integrated manufacturing workflow connects surface finishing with downstream sheet metal fabrication, reducing the need for multiple external suppliers.
We support customized production and can discuss MOQ, sampling, production schedules, and project requirements based on the specific order.
Your Design. Our Manufacturing. One Controlled Result.
Tell us what you are building, what you need to achieve, and where the current challenge is. Our team will help you find the right material, process, and manufacturing path.